Timer Alarm

Technical Parameters

• Power supply:                    85V - 240V
• Rated voltage:                    50 - 60HZ
• Delay range:                       (H) 1M - 99H99M
  ------------------------------------ (M) 1S - 99M99S
  -------------------------------------(S)  0.01S - 99.99S
• Contact capacity:                AC22V (3A)    DC30V (3A)
• Mechanical life:                  ≥10⁷ times
• Electrical life:                      ≥10⁵ times
• Ambient temperature:     -10℃ ~ +50℃
• Power consumption:        ≤3w
• Alarm sound:                     90 dB

Features

• Double LED digital tube display
• Preset settings are simple and convenient
• Nice appearance
• High-end technology, low failure rate

Precautions

• Use a shielded wire to reset and suspend the guidewire
• It's forbidden adding external voltage when reset and suspend

Function And Count Settings Operation Method

• Press and hold the RST key for 3 seconds or short to reset terminal to reset
• Press the corresponding number key to adjust the corresponding display digit
• Press the SET button to select the time
• Press and hold the SET button for 3 seconds to enter the setup menu

Others

• The above parameters set, re-power or press the reset button or short reset the terminal to work.
• At any time short reset the terminal, will return to the initial position, open and then start again, the use of this feature, the reset terminal control contacts can be achieved to break the delay control.
• Tired timer to use, at any time short to suspend the terminal, time to pause, display to maintain, continue to continue after the break, use this function keys to do the use of timer.
• DC 12V output can be used as a sensor power supply, current <30mA.
• When the count reaches the preset value, the relay pull, stop counting.